New Grease Pit Installation
Plumbing installation and connections for grease arrestors included in the approved hydraulic design for new commercial kitchen fit-outs and food-service tenancies.
Commercial Grease Pit & Grease Trap Plumbing
Specialist commercial grease arrestor installation, replacement and trade waste plumbing for restaurants, cafés and commercial kitchens across Brisbane and South East Queensland.
We carry out the grease pit and grease trap plumbing within our scope in line with the approved hydraulic design and your construction program — working directly with builders, shopfitters and site managers.
30+ Years
Plumbing Experience
QBCC Licensed
Licence No. 15538687
Commercial Plumbing Focus
Plumbing for Builders
Brisbane & SEQ
Wide Coverage
What It Is
A grease pit — also called a grease trap or grease arrestor — is a pre-treatment device that captures fats, oils, grease and food solids from commercial kitchen wastewater before it enters the sewer.
Grease arrestors are typically required by local water authorities for food-service premises as part of the trade waste system, and the plumbing that connects them must be carried out by a licensed plumber in accordance with the approved hydraulic design.
We install, replace and connect these systems as part of commercial plumbing projects across Brisbane — within our plumbing scope and in line with the project documentation.

Grease Arrestor Installation
Grease arrestor installation with connected underground trade waste pipework
Our Services
Plumbing installation, connections and alterations for commercial grease management systems, coordinated with the approved design and construction program.
Plumbing installation and connections for grease arrestors included in the approved hydraulic design for new commercial kitchen fit-outs and food-service tenancies.
Plumbing alterations, replacements and upgrades to existing grease pit systems during renovations, refurbishments or changes of tenancy.
Licensed trade waste plumbing tying grease arrestors into the sewer system in line with the relevant water authority requirements and project documentation.
Full commercial kitchen hydraulic scope — sinks, drainage, hot water, equipment connections and the grease line — coordinated with the builder and other trades.
How It Comes Together
Commercial grease pit plumbing is sequenced with the wider construction program. Each stage is coordinated with the builder and other trades to keep the project on schedule.
We review the approved hydraulic design and project documentation to confirm the grease arrestor type, position and connections within our plumbing scope.
We carry out the hydraulic rough-in for the grease line and trade waste drainage, coordinated with the builder and other trades during construction.
Where included in our scope, we install or coordinate the specified grease arrestor in accordance with the project documentation and approved design.
Final fit-off, connections and commissioning of the trade waste system within our scope, ready for handover and the relevant inspections.
Hydraulic design and grease arrestor sizing are determined by the project hydraulic designer or engineer. We carry out the plumbing installation and connections in accordance with the approved design and project documentation, within our plumbing scope.
Built Around Commercial Projects
We work directly with builders, shopfitters and head contractors across Brisbane and South East Queensland — coordinating our plumbing scope with the construction program and other trades so the grease line and trade waste system land on program.
Direct site-team contact
A direct line to the site team — not layers of sub-contractors.
Clear communication
RFIs answered and sequencing or site issues flagged early.
Full plumbing scope
Rough-in through to fit-off and commissioning within our scope.
Work to applicable standards
Installed in line with the approved design and applicable standards.
Applications
Restaurants
View IndustryCafés
View IndustryCommercial Kitchens
View IndustryTakeaway Shops
Hospitality Fit-Outs
Retail Food Premises
FAQ
A grease pit — also called a grease trap or grease arrestor — is a pre-treatment device that captures fats, oils, grease and food solids from commercial kitchen wastewater before it enters the sewer. Grease arrestors are typically required by local water authorities for food-service premises as part of the trade waste system, and must be installed and connected by a licensed plumber.
Where a grease arrestor forms part of the approved hydraulic design and is included within our plumbing scope, we install or coordinate the specified unit in accordance with the project documentation. The arrestor is sized by the hydraulic designer to the fixture load and the requirements of the relevant water authority, and we connect the grease line and drainage to the trade waste system.
Yes. Where included within our plumbing scope, we connect the grease line and drainage to the grease arrestor as part of a commercial shop fit-out, coordinated with the builder and other trades during rough-in and fit-off so the trade waste system is ready for handover.
Yes — we work directly with builders, shopfitters and site managers, coordinating our plumbing scope with the construction program and other trades throughout the project. Grease arrestor positioning is usually locked in early in a fit-out, so clear communication with the site team is essential.
Where included within our plumbing scope, we can carry out plumbing alterations, replacement work and upgrades to existing grease pit and grease trap systems as part of a renovation or commercial upgrade. This may involve replacing an arrestor, relocating the grease line, or reconnecting drainage to suit a new kitchen layout. The extent of work depends on the approved design and existing site conditions.
Yes. Oliver & Sons Plumbing carries the licences and insurances required to perform the plumbing services included within our scope of work, including QBCC licence No. 15538687. Specific project requirements can be discussed during the quoting process.
No. Hydraulic design and grease arrestor sizing are determined by the project hydraulic designer or engineer and set out in the approved hydraulic design. Our role is to carry out the plumbing installation and connections in accordance with that design and the project documentation, within our plumbing scope.
We provide commercial grease pit and grease trap plumbing across Brisbane and surrounding areas, including the Brisbane CBD, Fortitude Valley, South Brisbane, Logan, Ipswich, Redcliffe, Caboolture, North Lakes, Springfield, Moreton Bay, the Sunshine Coast, the Gold Coast and Toowoomba.
Project Experience
A selection of recent Oliver & Sons commercial plumbing work, including kitchen fit-outs, drainage and water services.

Bakery – Commercial Plumbing Fit-Out
Before-and-after look at a commercial bakery tenancy fit-out, featuring copper hot and cold water services, above-floor PVC drainage, hot water equipment and stainless-steel commercial wash-up fixtures.

Commercial Amenities Fitout
Full amenities refurbishment including new copper and PVC pipework, sanitary fixture installation, and compliant waste connections.

Commercial Laundromat Fit-Out
Complete commercial plumbing installation for a laundromat, including hot and cold water services, appliance connections and associated drainage.

Commercial Hot Water Installation
Installation of a commercial hot water system, including associated pipework, valves, connections and drainage.

3,000 L Grease Pit Installation
Installation of a 3,000 L in-ground grease pit and associated trade waste pipework.

Commercial Kitchen Plumbing Fit-Out
Commercial plumbing installation for a professional kitchen and wash-up area, including fixture connections, water services and drainage.
Areas we also service
We also work on commercial grease pit and trade waste plumbing projects across South East Queensland, subject to project scope and scheduling.
8
Project areas
Brisbane
Current areaBrisbane CBD · Fortitude Valley · Newstead · Eagle Farm · Murarrie
Gold Coast
Southport · Broadbeach · Robina · Burleigh Heads · Coomera
Toowoomba
Toowoomba CBD · Highfields · Wellcamp · Glenvale · Darling Downs
South Brisbane
West End · Woolloongabba · Kangaroo Point · Stones Corner · Greenslopes
Sunshine Coast
Maroochydore · Mooloolaba · Caloundra · Birtinya · Kawana Waters
Moreton Bay
North Lakes · Mango Hill · Caboolture · Morayfield · Redcliffe
Logan
Logan Central · Loganholme · Beenleigh · Springwood · Shailer Park
Ipswich
Ipswich · Springfield · Ripley · Redbank Plains · Yamanto
Ready to Get Started?
For Builders & Head Contractors
Tell us about the site and what you need from the grease pit. A photo or drawing is helpful if you have one. We can talk through the next step and confirm what we need to price the work.
QBCC Licensed • 30+ Years Plumbing Experience • Commercial Plumbing