New Grease Pit Installation
For new commercial kitchens in Toowoomba and Wellcamp, we install the grease-related plumbing shown in the approved hydraulic design and coordinate it with the kitchen layout.
Commercial Grease Pit & Grease Trap Plumbing
Specialist commercial grease arrestor installation, replacement and trade waste plumbing for restaurants, cafés and commercial kitchens across Toowoomba and the Darling Downs.
For projects in the Toowoomba CBD, Wellcamp and Highfields, grease and trade waste plumbing is coordinated with the approved hydraulic design and the build sequence so the services are ready for kitchen installation and handover.
30+ Years
Plumbing Experience
QBCC Licensed
Licence No. 15538687
Commercial Plumbing Focus
Plumbing for Builders
Toowoomba & Darling Downs
Wide Coverage
What It Is
A grease pit — also called a grease trap or grease arrestor — is a pre-treatment device that captures fats, oils, grease and food solids from commercial kitchen wastewater before it enters the sewer.
Grease arrestors are typically required by local water authorities for food-service premises as part of the trade waste system, and the plumbing that connects them must be carried out by a licensed plumber in accordance with the approved hydraulic design.
Toowoomba commercial projects range from CBD tenancy refurbishments to new builds around Wellcamp and Highfields. Grease and trade waste plumbing must be coordinated with the approved kitchen layout and the broader build sequence, particularly before floors, walls and equipment close in. We complete the plumbing scope in accordance with the project documentation.

Grease Arrestor Installation
Grease arrestor installation with connected underground trade waste pipework
Our Services
Plumbing installation, connections and alterations for commercial grease management systems, coordinated with the approved design and construction program.
For new commercial kitchens in Toowoomba and Wellcamp, we install the grease-related plumbing shown in the approved hydraulic design and coordinate it with the kitchen layout.
For CBD refurbishments and tenancy changes, including projects around Highfields and Glenvale, we can carry out grease and trade waste plumbing alterations or replacement work within the agreed scope.
We connect the specified grease arrestor to the trade waste drainage system and coordinate the plumbing interface with the builder and project documentation.
We coordinate kitchen sinks, drainage, hot water and equipment services as part of commercial food-service fit-outs across Toowoomba and the Darling Downs.
How It Comes Together
Commercial kitchens around Toowoomba and Wellcamp often move through rough-in, wall close-up, kitchen installation and final fit-off in defined stages. We coordinate grease and trade waste plumbing with those milestones so the work is completed before the relevant finishes and equipment are installed.
We review the approved hydraulic design and project documentation to confirm the grease arrestor type, position and connections within our plumbing scope.
We carry out the hydraulic rough-in for the grease line and trade waste drainage, coordinated with the builder and other trades during construction.
Where included in our scope, we install or coordinate the specified grease arrestor in accordance with the project documentation and approved design.
Final fit-off, connections and commissioning of the trade waste system within our scope, ready for handover and the relevant inspections.
Hydraulic design and grease arrestor sizing are determined by the project hydraulic designer or engineer. We carry out the plumbing installation and connections in accordance with the approved design and project documentation, within our plumbing scope.
Built Around Commercial Projects
For Toowoomba CBD, Wellcamp, Highfields and Glenvale projects, we work directly with builders, shopfitters and site managers to coordinate the grease line, trade waste connections and kitchen plumbing with the construction schedule.
Direct site-team contact
A direct line to the site team — not layers of sub-contractors.
Clear communication
RFIs answered and sequencing or site issues flagged early.
Full plumbing scope
Rough-in through to fit-off and commissioning within our scope.
Work to applicable standards
Installed in line with the approved design and applicable standards.
Applications
Restaurants
View IndustryCafés
View IndustryCommercial Kitchens
View IndustryTakeaway Shops
Hospitality Fit-Outs
Retail Food Premises
FAQ
A grease pit — also called a grease trap or grease arrestor — is a pre-treatment device that captures fats, oils, grease and food solids from commercial kitchen wastewater before it enters the sewer. Grease arrestors are typically required by local water authorities for food-service premises as part of the trade waste system, and must be installed and connected by a licensed plumber.
Where included within the approved design and our plumbing scope, we install or connect the specified arrestor and associated trade waste plumbing for Toowoomba commercial kitchens. Hydraulic design and sizing remain with the project designer or engineer.
Yes. We can connect grease and trade waste plumbing for a Toowoomba CBD or Wellcamp fit-out where the plumbing work is included within the project scope and approved hydraulic design.
Yes — we work directly with builders, shopfitters and site managers, coordinating our plumbing scope with the construction program and other trades throughout the project. Grease arrestor positioning is usually locked in early in a fit-out, so clear communication with the site team is essential.
Where included within our plumbing scope, we can carry out plumbing alterations, replacement work and upgrades to existing grease pit and grease trap systems as part of a renovation or commercial upgrade. This may involve replacing an arrestor, relocating the grease line, or reconnecting drainage to suit a new kitchen layout. The extent of work depends on the approved design and existing site conditions.
Yes. Oliver & Sons Plumbing carries the licences and insurances required to perform the plumbing services included within our scope of work, including QBCC licence No. 15538687. Specific project requirements can be discussed during the quoting process.
No. Hydraulic design and grease arrestor sizing are determined by the project hydraulic designer or engineer and set out in the approved hydraulic design. Our role is to carry out the plumbing installation and connections in accordance with that design and the project documentation, within our plumbing scope.
We provide commercial grease pit and grease trap plumbing across Toowoomba, including Toowoomba CBD, Wellcamp, Highfields, Glenvale, Harristown, Wilsonton, Rangeville and Kearneys Spring, subject to project scope and availability.
Project Experience
Selected genuine Oliver & Sons commercial plumbing work relevant to commercial kitchens, drainage, hydraulic rough-in and food-service fit-outs across Toowoomba and the Darling Downs.

Bakery – Commercial Plumbing Fit-Out
Before-and-after look at a commercial bakery tenancy fit-out, featuring copper hot and cold water services, above-floor PVC drainage, hot water equipment and stainless-steel commercial wash-up fixtures.

Commercial Amenities Fitout
Full amenities refurbishment including new copper and PVC pipework, sanitary fixture installation, and compliant waste connections.

Commercial Laundromat Fit-Out
Complete commercial plumbing installation for a laundromat, including hot and cold water services, appliance connections and associated drainage.

Commercial Hot Water Installation
Installation of a commercial hot water system, including associated pipework, valves, connections and drainage.

3,000 L Grease Pit Installation
Installation of a 3,000 L in-ground grease pit and associated trade waste pipework.

Commercial Kitchen Plumbing Fit-Out
Commercial plumbing installation for a professional kitchen and wash-up area, including fixture connections, water services and drainage.
Areas we also service
We also work on commercial grease pit and trade waste plumbing projects across South East Queensland, subject to project scope and scheduling.
8
Project areas
Brisbane
Brisbane CBD · Fortitude Valley · Newstead · Eagle Farm · Murarrie
Gold Coast
Southport · Broadbeach · Robina · Burleigh Heads · Coomera
Toowoomba
Current areaToowoomba CBD · Highfields · Wellcamp · Glenvale · Darling Downs
South Brisbane
West End · Woolloongabba · Kangaroo Point · Stones Corner · Greenslopes
Sunshine Coast
Maroochydore · Mooloolaba · Caloundra · Birtinya · Kawana Waters
Moreton Bay
North Lakes · Mango Hill · Caboolture · Morayfield · Redcliffe
Logan
Logan Central · Loganholme · Beenleigh · Springwood · Shailer Park
Ipswich
Ipswich · Springfield · Ripley · Redbank Plains · Yamanto
Ready to Get Started?
For Builders & Head Contractors
Tell us about the site and what you need from the grease pit. A photo or drawing is helpful if you have one. We can talk through the next step and confirm what we need to price the work.
QBCC Licensed • 30+ Years Plumbing Experience • Commercial Plumbing