New Grease Pit Installation
For new hospitality and food-service premises around Maroochydore and Mooloolaba, we install grease-related plumbing shown in the approved hydraulic design.
Commercial Grease Pit & Grease Trap Plumbing
Specialist commercial grease arrestor installation, replacement and trade waste plumbing for restaurants, cafés and commercial kitchens across the Sunshine Coast.
For projects in Maroochydore, Mooloolaba, Caloundra and Kawana Waters, we coordinate grease and trade waste plumbing with the approved design, kitchen set-out and wider construction program.
30+ Years
Plumbing Experience
QBCC Licensed
Licence No. 15538687
Commercial Plumbing Focus
Plumbing for Builders
Sunshine Coast & Surrounds
Wide Coverage
What It Is
A grease pit — also called a grease trap or grease arrestor — is a pre-treatment device that captures fats, oils, grease and food solids from commercial kitchen wastewater before it enters the sewer.
Grease arrestors are typically required by local water authorities for food-service premises as part of the trade waste system, and the plumbing that connects them must be carried out by a licensed plumber in accordance with the approved hydraulic design.
Sunshine Coast hospitality projects can range from new commercial kitchens to upgrades inside established coastal tenancies. Grease and trade waste plumbing needs to be coordinated with kitchen equipment, drainage falls, floor finishes and the builder’s staging. We work from the approved hydraulic design and deliver the plumbing connections within our scope.

Grease Arrestor Installation
Grease arrestor installation with connected underground trade waste pipework
Our Services
Plumbing installation, connections and alterations for commercial grease management systems, coordinated with the approved design and construction program.
For new hospitality and food-service premises around Maroochydore and Mooloolaba, we install grease-related plumbing shown in the approved hydraulic design.
For commercial tenancy upgrades in Caloundra, Birtinya and Kawana Waters, we can carry out grease and trade waste alterations, replacement and reconnection work within the agreed scope.
We connect specified grease arrestors into the trade waste drainage system and coordinate the plumbing interface with the builder and other trades.
We coordinate commercial kitchen water, drainage, hot water and equipment connections across Sunshine Coast fit-outs, staged around the wider construction program.
How It Comes Together
Commercial kitchen work in Maroochydore, Mooloolaba and Caloundra commonly involves several trades moving through the same tenancy. We coordinate the grease and trade waste plumbing with rough-in, kitchen installation and final fit-off so the relevant connection points are ready when the next trade needs access.
We review the approved hydraulic design and project documentation to confirm the grease arrestor type, position and connections within our plumbing scope.
We carry out the hydraulic rough-in for the grease line and trade waste drainage, coordinated with the builder and other trades during construction.
Where included in our scope, we install or coordinate the specified grease arrestor in accordance with the project documentation and approved design.
Final fit-off, connections and commissioning of the trade waste system within our scope, ready for handover and the relevant inspections.
Hydraulic design and grease arrestor sizing are determined by the project hydraulic designer or engineer. We carry out the plumbing installation and connections in accordance with the approved design and project documentation, within our plumbing scope.
Built Around Commercial Projects
For projects in Maroochydore, Mooloolaba, Caloundra, Birtinya and Kawana Waters, we work directly with builders, shopfitters and site managers to coordinate grease, trade waste and commercial kitchen plumbing with the construction sequence.
Direct site-team contact
A direct line to the site team — not layers of sub-contractors.
Clear communication
RFIs answered and sequencing or site issues flagged early.
Full plumbing scope
Rough-in through to fit-off and commissioning within our scope.
Work to applicable standards
Installed in line with the approved design and applicable standards.
Applications
Restaurants
View IndustryCafés
View IndustryCommercial Kitchens
View IndustryTakeaway Shops
Hospitality Fit-Outs
Retail Food Premises
FAQ
A grease pit — also called a grease trap or grease arrestor — is a pre-treatment device that captures fats, oils, grease and food solids from commercial kitchen wastewater before it enters the sewer. Grease arrestors are typically required by local water authorities for food-service premises as part of the trade waste system, and must be installed and connected by a licensed plumber.
Where included within the approved design and our plumbing scope, we install or connect the specified arrestor and associated trade waste plumbing for Sunshine Coast food-service projects. Hydraulic design and sizing remain with the project designer or engineer.
Yes. We can connect grease and trade waste plumbing for a commercial kitchen or hospitality fit-out in Maroochydore, Mooloolaba or Caloundra where the work forms part of the approved plumbing scope.
Yes — we work directly with builders, shopfitters and site managers, coordinating our plumbing scope with the construction program and other trades throughout the project. Grease arrestor positioning is usually locked in early in a fit-out, so clear communication with the site team is essential.
Where included within our plumbing scope, we can carry out plumbing alterations, replacement work and upgrades to existing grease pit and grease trap systems as part of a renovation or commercial upgrade. This may involve replacing an arrestor, relocating the grease line, or reconnecting drainage to suit a new kitchen layout. The extent of work depends on the approved design and existing site conditions.
Yes. Oliver & Sons Plumbing carries the licences and insurances required to perform the plumbing services included within our scope of work, including QBCC licence No. 15538687. Specific project requirements can be discussed during the quoting process.
No. Hydraulic design and grease arrestor sizing are determined by the project hydraulic designer or engineer and set out in the approved hydraulic design. Our role is to carry out the plumbing installation and connections in accordance with that design and the project documentation, within our plumbing scope.
We provide commercial grease pit and grease trap plumbing across Sunshine Coast, including Maroochydore, Mooloolaba, Caloundra, Birtinya, Kawana Waters, Sippy Downs, Buderim, Nambour and Coolum Beach, subject to project scope and availability.
Project Experience
Selected genuine Oliver & Sons project work relevant to commercial kitchens, drainage, hydraulic services and trade waste plumbing across the Sunshine Coast.

Bakery – Commercial Plumbing Fit-Out
Before-and-after look at a commercial bakery tenancy fit-out, featuring copper hot and cold water services, above-floor PVC drainage, hot water equipment and stainless-steel commercial wash-up fixtures.

Commercial Amenities Fitout
Full amenities refurbishment including new copper and PVC pipework, sanitary fixture installation, and compliant waste connections.

Commercial Laundromat Fit-Out
Complete commercial plumbing installation for a laundromat, including hot and cold water services, appliance connections and associated drainage.

Commercial Hot Water Installation
Installation of a commercial hot water system, including associated pipework, valves, connections and drainage.

3,000 L Grease Pit Installation
Installation of a 3,000 L in-ground grease pit and associated trade waste pipework.

Commercial Kitchen Plumbing Fit-Out
Commercial plumbing installation for a professional kitchen and wash-up area, including fixture connections, water services and drainage.
Areas we also service
We also work on commercial grease pit and trade waste plumbing projects across South East Queensland, subject to project scope and scheduling.
8
Project areas
Brisbane
Brisbane CBD · Fortitude Valley · Newstead · Eagle Farm · Murarrie
Gold Coast
Southport · Broadbeach · Robina · Burleigh Heads · Coomera
Toowoomba
Toowoomba CBD · Highfields · Wellcamp · Glenvale · Darling Downs
South Brisbane
West End · Woolloongabba · Kangaroo Point · Stones Corner · Greenslopes
Sunshine Coast
Current areaMaroochydore · Mooloolaba · Caloundra · Birtinya · Kawana Waters
Moreton Bay
North Lakes · Mango Hill · Caboolture · Morayfield · Redcliffe
Logan
Logan Central · Loganholme · Beenleigh · Springwood · Shailer Park
Ipswich
Ipswich · Springfield · Ripley · Redbank Plains · Yamanto
Ready to Get Started?
For Builders & Head Contractors
Tell us about the site and what you need from the grease pit. A photo or drawing is helpful if you have one. We can talk through the next step and confirm what we need to price the work.
QBCC Licensed • 30+ Years Plumbing Experience • Commercial Plumbing