New Grease Pit Installation
On new hospitality and food-service builds across the Gold Coast, we install the grease-related plumbing shown in the approved hydraulic design and coordinate the connections with the kitchen set-out.
Commercial Grease Pit & Grease Trap Plumbing
Specialist commercial grease arrestor installation, replacement and trade waste plumbing for restaurants, cafés and commercial kitchens across the Gold Coast.
For projects in Southport, Robina, Broadbeach and Burleigh Heads, the grease and trade waste plumbing is coordinated with the approved hydraulic design and the builder’s construction program from rough-in through final fit-off.
30+ Years
Plumbing Experience
QBCC Licensed
Licence No. 15538687
Commercial Plumbing Focus
Plumbing for Builders
Gold Coast & Surrounds
Wide Coverage
What It Is
A grease pit — also called a grease trap or grease arrestor — is a pre-treatment device that captures fats, oils, grease and food solids from commercial kitchen wastewater before it enters the sewer.
Grease arrestors are typically required by local water authorities for food-service premises as part of the trade waste system, and the plumbing that connects them must be carried out by a licensed plumber in accordance with the approved hydraulic design.
Gold Coast food-service projects can involve a mix of new hospitality fit-outs and refurbishment work in existing tenancies. Grease and trade waste plumbing needs to be coordinated with kitchen set-out, slab or penetration requirements and the builder’s construction sequence. We work from the approved hydraulic design and deliver the plumbing connections within our agreed scope.

Grease Arrestor Installation
Grease arrestor installation with connected underground trade waste pipework
Our Services
Plumbing installation, connections and alterations for commercial grease management systems, coordinated with the approved design and construction program.
On new hospitality and food-service builds across the Gold Coast, we install the grease-related plumbing shown in the approved hydraulic design and coordinate the connections with the kitchen set-out.
For tenancy refurbishments in Southport, Robina and Broadbeach, we can alter, replace or upgrade existing grease-related plumbing where that work forms part of the agreed project scope.
We connect specified grease arrestors into the trade waste drainage system and coordinate connection points with the builder and other trades during the fit-out.
We coordinate commercial kitchen sinks, drainage, hot water and equipment plumbing for hospitality fit-outs across the Gold Coast, staged around the construction program.
How It Comes Together
On Gold Coast fit-outs, plumbing often needs to be completed before kitchen equipment, wall linings and floor finishes are installed. We coordinate the grease line and trade waste stages with the builder so rough-in, arrestor connections and final fit-off happen in the right sequence.
We review the approved hydraulic design and project documentation to confirm the grease arrestor type, position and connections within our plumbing scope.
We carry out the hydraulic rough-in for the grease line and trade waste drainage, coordinated with the builder and other trades during construction.
Where included in our scope, we install or coordinate the specified grease arrestor in accordance with the project documentation and approved design.
Final fit-off, connections and commissioning of the trade waste system within our scope, ready for handover and the relevant inspections.
Hydraulic design and grease arrestor sizing are determined by the project hydraulic designer or engineer. We carry out the plumbing installation and connections in accordance with the approved design and project documentation, within our plumbing scope.
Built Around Commercial Projects
For projects in Southport, Robina, Broadbeach and Burleigh Heads, we coordinate directly with builders, shopfitters and site managers on the plumbing sequence, connection points and final fit-off. Our focus is keeping the grease and trade waste scope clear while the surrounding tenancy works progress.
Direct site-team contact
A direct line to the site team — not layers of sub-contractors.
Clear communication
RFIs answered and sequencing or site issues flagged early.
Full plumbing scope
Rough-in through to fit-off and commissioning within our scope.
Work to applicable standards
Installed in line with the approved design and applicable standards.
Applications
Restaurants
View IndustryCafés
View IndustryCommercial Kitchens
View IndustryTakeaway Shops
Hospitality Fit-Outs
Retail Food Premises
FAQ
A grease pit — also called a grease trap or grease arrestor — is a pre-treatment device that captures fats, oils, grease and food solids from commercial kitchen wastewater before it enters the sewer. Grease arrestors are typically required by local water authorities for food-service premises as part of the trade waste system, and must be installed and connected by a licensed plumber.
Where included within the approved design and our plumbing scope, we install or connect the specified arrestor and associated grease and trade waste pipework for Gold Coast commercial kitchens. The designer or engineer remains responsible for hydraulic design and sizing.
Yes. We can connect grease and trade waste plumbing as part of a Southport, Robina, Broadbeach or Burleigh Heads shop fit-out where the work is included within the project scope and approved design.
Yes — we work directly with builders, shopfitters and site managers, coordinating our plumbing scope with the construction program and other trades throughout the project. Grease arrestor positioning is usually locked in early in a fit-out, so clear communication with the site team is essential.
Where included within our plumbing scope, we can carry out plumbing alterations, replacement work and upgrades to existing grease pit and grease trap systems as part of a renovation or commercial upgrade. This may involve replacing an arrestor, relocating the grease line, or reconnecting drainage to suit a new kitchen layout. The extent of work depends on the approved design and existing site conditions.
Yes. Oliver & Sons Plumbing carries the licences and insurances required to perform the plumbing services included within our scope of work, including QBCC licence No. 15538687. Specific project requirements can be discussed during the quoting process.
No. Hydraulic design and grease arrestor sizing are determined by the project hydraulic designer or engineer and set out in the approved hydraulic design. Our role is to carry out the plumbing installation and connections in accordance with that design and the project documentation, within our plumbing scope.
We provide commercial grease pit and grease trap plumbing across Gold Coast, including Southport, Robina, Broadbeach, Burleigh Heads, Coomera, Helensvale, Varsity Lakes and Nerang, subject to project scope and availability.
Project Experience
Selected genuine Oliver & Sons project work relevant to commercial kitchens, drainage, trade waste connections and food-service fit-outs on the Gold Coast.

Bakery – Commercial Plumbing Fit-Out
Before-and-after look at a commercial bakery tenancy fit-out, featuring copper hot and cold water services, above-floor PVC drainage, hot water equipment and stainless-steel commercial wash-up fixtures.

Commercial Amenities Fitout
Full amenities refurbishment including new copper and PVC pipework, sanitary fixture installation, and compliant waste connections.

Commercial Laundromat Fit-Out
Complete commercial plumbing installation for a laundromat, including hot and cold water services, appliance connections and associated drainage.

Commercial Hot Water Installation
Installation of a commercial hot water system, including associated pipework, valves, connections and drainage.

3,000 L Grease Pit Installation
Installation of a 3,000 L in-ground grease pit and associated trade waste pipework.

Commercial Kitchen Plumbing Fit-Out
Commercial plumbing installation for a professional kitchen and wash-up area, including fixture connections, water services and drainage.
Areas we also service
We also work on commercial grease pit and trade waste plumbing projects across South East Queensland, subject to project scope and scheduling.
8
Project areas
Brisbane
Brisbane CBD · Fortitude Valley · Newstead · Eagle Farm · Murarrie
Gold Coast
Current areaSouthport · Broadbeach · Robina · Burleigh Heads · Coomera
Toowoomba
Toowoomba CBD · Highfields · Wellcamp · Glenvale · Darling Downs
South Brisbane
West End · Woolloongabba · Kangaroo Point · Stones Corner · Greenslopes
Sunshine Coast
Maroochydore · Mooloolaba · Caloundra · Birtinya · Kawana Waters
Moreton Bay
North Lakes · Mango Hill · Caboolture · Morayfield · Redcliffe
Logan
Logan Central · Loganholme · Beenleigh · Springwood · Shailer Park
Ipswich
Ipswich · Springfield · Ripley · Redbank Plains · Yamanto
Ready to Get Started?
For Builders & Head Contractors
Tell us about the site and what you need from the grease pit. A photo or drawing is helpful if you have one. We can talk through the next step and confirm what we need to price the work.
QBCC Licensed • 30+ Years Plumbing Experience • Commercial Plumbing