New Grease Pit Installation
For new food-service projects in Logan Central and Loganholme, we install grease-related plumbing shown in the approved hydraulic design and coordinate it with the kitchen set-out.
Commercial Grease Pit & Grease Trap Plumbing
Specialist commercial grease arrestor installation, replacement and trade waste plumbing for restaurants, cafés and commercial kitchens across Logan and the southern Brisbane corridor.
For projects in Logan Central, Beenleigh, Loganholme and Springwood, we coordinate grease and trade waste plumbing with the approved design, existing site conditions and the builder’s construction program.
30+ Years
Plumbing Experience
QBCC Licensed
Licence No. 15538687
Commercial Plumbing Focus
Plumbing for Builders
Logan & Southern Corridor
Wide Coverage
What It Is
A grease pit — also called a grease trap or grease arrestor — is a pre-treatment device that captures fats, oils, grease and food solids from commercial kitchen wastewater before it enters the sewer.
Grease arrestors are typically required by local water authorities for food-service premises as part of the trade waste system, and the plumbing that connects them must be carried out by a licensed plumber in accordance with the approved hydraulic design.
Logan sits along a busy southern growth corridor where commercial work can include new builds, tenancy refurbishments and hospitality upgrades. Grease and trade waste plumbing in Logan Central, Beenleigh, Loganholme and Springwood needs to fit around existing services and the builder’s staging. We work from the approved hydraulic design and complete the plumbing connections within our scope.

Grease Arrestor Installation
Grease arrestor installation with connected underground trade waste pipework
Our Services
Plumbing installation, connections and alterations for commercial grease management systems, coordinated with the approved design and construction program.
For new food-service projects in Logan Central and Loganholme, we install grease-related plumbing shown in the approved hydraulic design and coordinate it with the kitchen set-out.
For refurbishment work in Beenleigh, Springwood and Shailer Park, we can alter, replace or reconnect existing grease and trade waste plumbing where included within the project scope.
We connect specified grease arrestors into the trade waste drainage system and coordinate the installation with the builder and other trades.
We coordinate commercial kitchen water, drainage, hot water and equipment plumbing for hospitality and tenancy fit-outs across Logan.
How It Comes Together
On Logan fit-outs, grease and trade waste plumbing can interface with kitchen equipment, drainage, slab penetrations and finishing work. We coordinate the stages with the builder so rough-in, specified arrestor connections and final fit-off are completed before the relevant areas are closed up.
We review the approved hydraulic design and project documentation to confirm the grease arrestor type, position and connections within our plumbing scope.
We carry out the hydraulic rough-in for the grease line and trade waste drainage, coordinated with the builder and other trades during construction.
Where included in our scope, we install or coordinate the specified grease arrestor in accordance with the project documentation and approved design.
Final fit-off, connections and commissioning of the trade waste system within our scope, ready for handover and the relevant inspections.
Hydraulic design and grease arrestor sizing are determined by the project hydraulic designer or engineer. We carry out the plumbing installation and connections in accordance with the approved design and project documentation, within our plumbing scope.
Built Around Commercial Projects
For projects in Logan Central, Beenleigh, Loganholme, Springwood and Shailer Park, we coordinate directly with builders, shopfitters and site managers on grease and trade waste plumbing, including connection points and fit-off sequencing.
Direct site-team contact
A direct line to the site team — not layers of sub-contractors.
Clear communication
RFIs answered and sequencing or site issues flagged early.
Full plumbing scope
Rough-in through to fit-off and commissioning within our scope.
Work to applicable standards
Installed in line with the approved design and applicable standards.
Applications
Restaurants
View IndustryCafés
View IndustryCommercial Kitchens
View IndustryTakeaway Shops
Hospitality Fit-Outs
Retail Food Premises
FAQ
A grease pit — also called a grease trap or grease arrestor — is a pre-treatment device that captures fats, oils, grease and food solids from commercial kitchen wastewater before it enters the sewer. Grease arrestors are typically required by local water authorities for food-service premises as part of the trade waste system, and must be installed and connected by a licensed plumber.
Where included within the approved design and our plumbing scope, we install or connect the specified arrestor and associated pipework for Logan commercial kitchen projects. Hydraulic design and sizing remain with the project designer or engineer.
Yes. We can connect grease and trade waste plumbing for a Beenleigh, Loganholme or Springwood fit-out where the work is included within the approved design and agreed plumbing scope.
Yes — we work directly with builders, shopfitters and site managers, coordinating our plumbing scope with the construction program and other trades throughout the project. Grease arrestor positioning is usually locked in early in a fit-out, so clear communication with the site team is essential.
Where included within our plumbing scope, we can carry out plumbing alterations, replacement work and upgrades to existing grease pit and grease trap systems as part of a renovation or commercial upgrade. This may involve replacing an arrestor, relocating the grease line, or reconnecting drainage to suit a new kitchen layout. The extent of work depends on the approved design and existing site conditions.
Yes. Oliver & Sons Plumbing carries the licences and insurances required to perform the plumbing services included within our scope of work, including QBCC licence No. 15538687. Specific project requirements can be discussed during the quoting process.
No. Hydraulic design and grease arrestor sizing are determined by the project hydraulic designer or engineer and set out in the approved hydraulic design. Our role is to carry out the plumbing installation and connections in accordance with that design and the project documentation, within our plumbing scope.
We provide commercial grease pit and grease trap plumbing across Logan, including Logan Central, Beenleigh, Loganholme, Springwood, Slacks Creek, Shailer Park, Underwood, Woodridge and Daisy Hill, subject to project scope and availability.
Project Experience
Selected genuine Oliver & Sons commercial plumbing work relevant to hospitality, commercial kitchens, drainage and trade waste connections across Logan and the southern Brisbane corridor.

Bakery – Commercial Plumbing Fit-Out
Before-and-after look at a commercial bakery tenancy fit-out, featuring copper hot and cold water services, above-floor PVC drainage, hot water equipment and stainless-steel commercial wash-up fixtures.

Commercial Amenities Fitout
Full amenities refurbishment including new copper and PVC pipework, sanitary fixture installation, and compliant waste connections.

Commercial Laundromat Fit-Out
Complete commercial plumbing installation for a laundromat, including hot and cold water services, appliance connections and associated drainage.

Commercial Hot Water Installation
Installation of a commercial hot water system, including associated pipework, valves, connections and drainage.

3,000 L Grease Pit Installation
Installation of a 3,000 L in-ground grease pit and associated trade waste pipework.

Commercial Kitchen Plumbing Fit-Out
Commercial plumbing installation for a professional kitchen and wash-up area, including fixture connections, water services and drainage.
Areas we also service
We also work on commercial grease pit and trade waste plumbing projects across South East Queensland, subject to project scope and scheduling.
8
Project areas
Brisbane
Brisbane CBD · Fortitude Valley · Newstead · Eagle Farm · Murarrie
Gold Coast
Southport · Broadbeach · Robina · Burleigh Heads · Coomera
Toowoomba
Toowoomba CBD · Highfields · Wellcamp · Glenvale · Darling Downs
South Brisbane
West End · Woolloongabba · Kangaroo Point · Stones Corner · Greenslopes
Sunshine Coast
Maroochydore · Mooloolaba · Caloundra · Birtinya · Kawana Waters
Moreton Bay
North Lakes · Mango Hill · Caboolture · Morayfield · Redcliffe
Logan
Current areaLogan Central · Loganholme · Beenleigh · Springwood · Shailer Park
Ipswich
Ipswich · Springfield · Ripley · Redbank Plains · Yamanto
Ready to Get Started?
For Builders & Head Contractors
Tell us about the site and what you need from the grease pit. A photo or drawing is helpful if you have one. We can talk through the next step and confirm what we need to price the work.
QBCC Licensed • 30+ Years Plumbing Experience • Commercial Plumbing